Huawei Quidway S5600 Series User Manual

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
Huawei Technologies Proprietary
2-18
Table 2-15 Configure to assign IP addresses dynamically
Operation Command Description
Enter system view
system-view
—
interface interface-type
interface-number
dhcp server expired { day
day [ hour hour [ minute
minute ] ] | unlimited }
Configure
for the
current
interface
quit
Configure
the lease
time
Configure
multiple
interfaces
in system
view
dhcp server expired { day
day [ hour hour [ minute
minute ] ] | unlimited }
{ interface interface-type
interface-number [ to
interface-type
interface-number ] | all }
Optional
The default lease time is
one day
Specify the IP
addresses that are not
dynamically assigned
dhcp server forbidden-ip
low-ip-address
[ high-ip-address ]
Optional
By default, all IP
addresses in a DHCP
address pool are available
for being dynamically
assigned.
 Note:
z The dhcp server forbidden-ip command can be executed repeatedly. That is, you
can repeatedly configure IP addresses that are not dynamically assigned to DHCP
clients.
z Use the dhcp server forbidden-ip command to configure the IP addresses that
are not assigned dynamically in global address pools and interface address pools.
z If an IP address that is not to be automatically assigned has been configured as a
statically-bound IP address, the DHCP server still assigns this IP address to the
client whose MAC address has been bound.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English