Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 5
DHCP Accounting Configuration
Huawei Technologies Proprietary
5-3
III. Configuration procedure
# Enter system view.
<Quidway> system-view
# Create VLAN 2.
[Quidway] vlan 2
[Quidway-vlan2] quit
# Create VLAN 3.
[Quidway] vlan 3
[Quidway-vlan3] quit
# Enter GigabitEthernet1/0/2 port view and add the port to VLAN 2.
[Quidway] interface GigabitEthernet 1/0/2
[Quidway-GigabitEthernet1/0/2] port access vlan 2
[Quidway-GigabitEthernet1/0/2] quit
# Enter GigabitEthernet1/0/1 port view and add the port to VLAN 3.
[Quidway] interface GigabitEthernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port access vlan 3
[Quidway-GigabitEthernet1/0/1] quit
# Enter VLAN 2 interface view and assign the IP address 10.1.1.1/24 to the VLAN
interface.
[Quidway] interface Vlan-interface 2
[Quidway-Vlan-interface2] ip address 10.1.1.1 24
[Quidway-Vlan-interface2] quit
# Enter VLAN 3 interface view and assign the IP address 10.1.2.1/24 to the VLAN
interface.
[Quidway] interface Vlan-interface 3
[Quidway-Vlan-interface3] ip address 10.1.2.1 24
[Quidway-Vlan-interface3] quit
# Create a domain and a RADIUS scheme. Associate the domain with the RADIUS
scheme.
[Quidway] radius scheme 123
[Quidway-radius-123] primary authentication 10.1.2.2
[Quidway-radius-123] primary accounting 10.1.2.2
[Quidway] domain 123
[Quidway-isp-123] scheme radius-scheme 123
[Quidway-isp-123] quit
# Create an address pool on the DHCP server.
[Quidway] dhcp server ip-pool test
[Quidway-dhcp-pool-test] network 10.1.1.0 mask 255.255.255.0
To Next Page
Loading...
