Huawei Quidway S5600 Series - Page 806

Operation Manual – PoE & PoE Profile
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
PoE Profile Configuration
Huawei Technologies Proprietary
2-5
II. Configuration procedure
# Create profile 1, and enter PoE profile view.
<Quidway> system-view
[Quidway] poe-profile Profile1
# In profile 1, add the PoE policy configuration applicable to GigabitEthernet1/0/1
through GigabitEthernet1/0/5 ports for users of group A.
[Quidway-poe-profile-Profile1] poe enable
[Quidway-poe-profile-Profile1] poe mode signal
[Quidway-poe-profile-Profile1] poe priority critical
[Quidway-poe-profile-Profile1] poe max-power 3000
[Quidway-poe-profile-Profile1] quit
# Display detailed configuration information for Profile 1.
[Quidway] display poe-profile name Profile1
# Create profile 2, and enter poe-profile view.
[Quidway] poe-profile profile2
# In Profile 2, add the PoE policy configuration applicable to GigabitEthernet1/0/6
through GigabitEthernet1/0/10 ports for type A group users.
[Quidway-poe-profile-Profile2] poe enable
[Quidway-poe-profile-Profile2] poe mode signal
[Quidway-poe-profile-Profile2] poe priority high
[Quidway-poe-profile-Profile2] poe max-power 15400
[Quidway-poe-profile-Profile2] quit
# Display detailed configuration information for Profile 2.
[Quidway] display poe-profile name profile2
# Apply the configured Profile 1 to GigabitEthernet1/0/1 through GigabitEthernet1/0/5
ports.
[Quidway] apply poe-profile profile1 interface GigabitEthernet1/0/1 to
GigabitEthernet1/0/5
# Apply the configured Profile 2 to GigabitEthernet1/0/6 through GigabitEthernet1/0/10
ports.
[Quidway] apply poe-profile profile2 interface GigabitEthernet1/0/6 to
GigabitEthernet1/0/10