Huawei Quidway S5600 Series User Manual

Operation Manual – NTP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1 NTP Configuration
Huawei Technologies Proprietary
1-7
Operation Command Description
Configure to operate in
the NTP client mode
ntp-service
unicast-server
{ remote-ip |
server-name }
[ authentication-keyid
key-id | priority |
source-interface
interface-type
interface-number |
version number ]*
Optional
By default, no Ethernet
switch operates in the NTP
client mode
Configure to operate in
the NTP peer mode
ntp-service
unicast-peer { remote-ip
| peer-name }
[ authentication-keyid
key-id | priority |
source-interface
interface-type
interface-number |
version number ]*
Optional
By default, no Ethernet
switch operates in the NTP
peer mode
Enter VLAN interface
view
interface Vlan-interface
vlan-id
—
Configure to operate in
the NTP broadcast
client mode
ntp-service
broadcast-client
Optional
By default, no Ethernet
switch operates in the NTP
broadcast client mode
Configure to operate in
the NTP broadcast
server mode
ntp-service
broadcast-server
[ authentication-keyid
key-id | version
number ]*
Optional
By default, no Ethernet
switch operates in the NTP
broadcast server mode
Configure to operate in
the NTP multicast client
mode
ntp-service
multicast-client
[ ip-address ]
Optional
By default, no Ethernet
switch operates in the NTP
multicast client mode
Configure to operate in
the NTP multicast
server mode
ntp-service
multicast-server
[ ip-address ]
[ authentication-keyid
keyid | ttl ttl-number |
version number ]*
Optional
By default, no Ethernet
switch operates in the NTP
multicast server mode

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English