Huawei Quidway S5600 Series

To Next Page

To Previous Page

Operation Manual – NTP

Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1 NTP Configuration

Huawei Technologies Proprietary

1-20

Configure S5600-1 and S5600-2 to listen to multicast packets through their VLAN

interface 2.

 Note:

This example assumes that Quidway3 is a switch that supports the local clock being

the master clock.

II. Network diagram

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

S5600-2

S5600-1

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

Quidway 3

Quidway 4

3.0.1.31/24

3.0.1.32/24

1.0.1.31/24

Vlan-interface 2

S5600-2

S5600-1

Figure 1-9 Network diagram for NTP multicast mode configuration

III. Configuration procedures

1) Configure Quidway3.

# Enter system view.

<Quidway3> system-view

[Quidway3]

# Enter VLAN-interface 2 view.

[Quidway3] interface Vlan-interface 2

# Configure Quidway3 to be a multicast server.

[Quidway3-Vlan-interface2] ntp-service multicast-server

2) Configure S5600-1.

# Enter system view.

<S5600-1> system-view

[S5600-1]

# Enter VLAN-interface 2 view.

[[S5600-1] interface vlan-interface 2

# Configure Quidway4 to be a multicast client.

[S5600-1-Vlan-interface2] ntp-service multicast-client

Main Page

Huawei Quidway S5600 Series - Page 849

Table of Contents

Other manuals for Huawei Quidway S5600 Series

Related product manuals