Huawei Quidway S5600 Series - Page 863

Operation Manual - SSH Terminal Services
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
SSH Terminal Services
Huawei Technologies Proprietary
1-9
Operation Command Description
Assign public key to
SSH user
ssh user username assign
rsa-key keyname
Required
Keyname is the name of
an existing public key. If
the user already has a
public key, the new
public key overrides the
old one.
 Note:
By this method, it is necessary to use software to convert public key format at the client
and assign the converted public keys to SSH users one by one.
2) Use command to assign public keys automatically
Operations at client end:
z Use SSH1.5/2.0 client software to generate random RSA key pair.
z Use FTP/TFTP to transfer the public key fil to the Flash memory of the server.
Operations at server end:
Table 1-7 Use command to assign public keys automatically
Operation Command Description
Enter system view
system-view
-
Convert public key
format and
automatically assign
public key
rsa peer-public-key
key-name import sshkey
file-name
The field filename must
be consistent with the
name of the public key
file sent to the Flash
memory.
 Note:
By this method, it is not necessary to assign public keys to SSH users one by one. This
method is recommended.
VI. Specifying source IP address for sending traffic packets
The following configurations specify source IP address or source interface for SSH
Server, and have enhanced the manageability of the traffic.