Huawei Quidway S5600 Series User Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 8 User Control
Huawei Technologies Proprietary
8-6
Operation Command Description
Quit to system
view
quit —
Apply the ACL
while configuring
the SNMP
community name
snmp-agent community
{ read | write }
community-name
[ [ mib-view view-name ] |
[ acl acl-number ] ]*
Optional
By default, SNMPv1 and
SNMPv2c use community
name to access.
Apply the ACL
while configuring
the SNMP group
name
snmp-agent group { v1 |
v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent group v3
group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
Optional
By default, the authentication
mode and the encryption
mode are configured as none
for the group.
Apply the ACL
while configuring
the SNMP user
name
snmp-agent group { v1 |
v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent group v3
group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
Optional
 Note:
You can specify different ACLs while configuring the SNMP community name, the
SNMP group name and the SNMP user name.
As SNMP community name is a feature of SNMP v1 and SNMP v2c, the specified ACLs
in the command that configures SNMP community names (the snmp-agent
community command) take effect in the network management systems that adopt
SNMP v1 and SNMP v2c.
Similarly, as SNMP group name and SNMP user name are features of SNMP v2c and
the higher SNMP versions, the specified ACLs in the commands that configure SNMP

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English