Huawei Quidway S5600 Series User Manual

Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 2 Basic System Configuration &
Debugging
Huawei Technologies Proprietary
2-3
z When the system reaches the specified end time, it automatically subtracts the
specified offset from the current time, so as to toggle the summer time to normal
system time.
Perform the following configuration in user view.
Table 2-6 Set the summer time
Operation Command Description
Set the name and
time range of the
summer time
clock summer-time zone_name
{ one-off | repeating } start-time
start-date end-time end-date
offset-time
Optional
2.1.7 Setting the CLI Language Mode
Table 2-7 Set the CLI language mode
Operation Command Description
Set the CLI
language mode
language-mode { chinese |
english }
Optional
By default, the
command line
interface (CLI)
language mode is
English.
2.1.8 Returning from Current View to Lower Level View
Table 2-8 Return from current view to lower level view
Operation Command Description
Return from current
view to lower level
view
quit
This operation will
result in exiting the
system if current
view is user view.
2.1.9 Returning from Current View to User View
Table 2-9 Return from current view to user view
Operation Command Description
Return from current
view to user view
return
The composite key
<Ctrl+Z> has the
same effect with the
return command.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English