Hurco winmax - Page 291

WinMax Lathe Conversational Part Programming v546CO Index — XIII
2-105, 2 - 121
Linear Y Motion
radial milling 2-68
Linear Y motion
axial milling 2-125
LINEAR Y MOTION field
Axial Lettering screen 2-176
Radial Lettering screen 2-111
Radial Mill Circle screen
Linear Coordinates 2-94, 2 - 101,
2-108, 2-123, 2 - 134, 2-
137, 2 - 142, 2 - 145, 2-
152, 2 - 159, 2 - 165, 2-
174, 2 - 184, 2 - 186
Radial Mill Contour screen
Linear Coordinates 2-77
list arguments, NC Program Call screen 2-
210
Live Tooling data blocks 2-66
LIVE TOOLING F3 softkey, New Block
screen 2-66
Location Number field
Axial Locations screen 2 - 182
Radial Holes Locations screen 2-121
M
M Code description 1-4
M CODE field
Machine Function (M Code) screen 2-
198
M19 (Spindle Orient) field
Machine Function (M Code) screen 2-
198
M203 (Sync Spindles Forward Mode) field
Machine Function (M Code) screen 2-
198
M204 (Sync Spindle Reverse Mode) field
Machine Function (M Code) screen 2-
198
M24 (Part Conveyor On)
Machine Function (M Code) screen 2-
199
M3 (Spindle CW) field
Machine Function (M Code) screen 2-
198
M4 (Spindle CCW) field
Machine Function (M Code) screen 2-
198
M5 (Spindle Off) field
Machine Function (M Code) screen 2-
198
M50 (Chip Conveyor On)
Machine Function (M Code) screen 2-
199
Machine Code definitions 2-198
Machine Function screen 2-198
MAJOR DIAMETER field
Threading 2-41, 2-43, 2-45, 2-47
MAX OFFSET field
Axial Mill Contour screen 2 - 130
Radial Mill Contour screen 2-73
MAX RPM (Live Tooling Spindle) field
Change Parameters screen 2-193
MAX RPM (Primary Spindle) field
Change Parameters screen 2-193
MAX RPM (Sub-Spindle) field
Change Parameters screen 2-193
maximum number of segments 2-78, 2-
135
messages
error -vii
meters per minute (MPM) 1-3
MILL FEED field
Axial Lettering screen 2-175
Axial Mill Circle screen 2-148
Axial Mill Contour screen 2 - 129
Axial Mill Flats screen 2 - 169
Axial Mill Frame screen 2-155
Axial Mill Slot screen 2 - 161
Radial Lettering screen 2-110
Radial Mill Circle screen 2-91
Radial Mill Contour screen 2-72
Radial Mill Frame screen 2-97
Radial Slot screen 2-104
millimeters per minute (MMPM) 1-3
millimeters per revolution (MMPR) 1-3
MILLING TYPE field
Axial Mill Circle screen 2-148
Axial Mill Contour screen 2 - 129
Axial Mill Frame screen 2-154
Radial Mill Circle screen 2-90, 2-96
Radial Mill Contour screen 2-72
MINIMUM PECK DEPTH field
Hole cycle 2-60
MINOR DIAMETER field
Threading 2-41, 2-43, 2-45, 2-47
MISCELLANEOUS F4 softkey
TMM, TMX MY, and TMX MYS Series 2-
191
mode
programming -viii
move a data block to a different location
within the part program 1-10
MOVE ALL HOME F4 softkey
Position datablock 2-4
Move Tailstock Data Block, TM12 and TM18
series machines 2-206
MOVE TAILSTOCK description 1-5
MOVE TAILSTOCK F5 softkey 2-206