Husqvarna TE511 - Oil Filter and Spark Plug Procedures

F1.7
H01732
ENGINE DISASSEMBLY/REASSEMBLY
1
st
edition (08-2010) _Rev. 11-2010
Oil lter disassembly
• Remove plug (1) with O-Ring (2).
• Disassemble oil lter (3).
Oil lter assembly
• Assemble oil lter (3).
• Assemble screw (1) with the O-Ring (2) slightly greased.
Tightening torque gures
Oil lter cover on crankcase
M45 x 1.5, with O-Ring Grease
thread
15 Nm / 1,5 Kgm / 11,06 ft/lb
Oil lter replacement.