Husqvarna TE511 - Engine Oil Filter Assembly

F1.9
H01855
H01856
ENGINE DISASSEMBLY/REASSEMBLY
1
st
edition (08-2010) _Rev. 11-2010
• Assemble rear oil mesh lter.
• Assemble the following parts:
- O-Rings (5, 4, 2)
- Filter (3)
• Fit screw (1).
Tightening torque gures
Oil mesh lter screw plug on crankcase
M20 x 1.5, with O-Ring Grease
thread
10 Nm / 1 Kgm / 7,38 ft/lb
• Assemble front oil mesh lter.
• Assemble the following parts:
- O-Rings (5, 4, 2)
- Filter (3)
• Fit screw (1).
Tightening torque gures
Oil mesh lter screw plug on crankcase
M20 x 1.5, with O-Ring Grease
thread
10 Nm / 1 Kgm / 7,38 ft/lb
Engine oil lter assembly