ELECTRICAL SYSTEM
1
st
edition (08-2010)_Rev. 11-2010
IMPORTANT
Before washing the motorcycle, it is necessary to duly protect the following
parts from water:
a) Rear opening of the mufer;
b) Clutch and front brake levers, handgrips, handlebar switches;
c) Air lter intake;
d) Steering head, wheel bearings;
e) Rear suspension drag drop link.
In addition to these precautions, NEVER ALLOW HIGH-PRESSURE AIR
OR WATER to get in contact with any ELECTRICAL PARTS, the FUEL
INJECTION SYSTEM, and especially the electronic control unit (1) and
the digital dashboard (2).
To Next Page
Loading...
