Husqvarna TE511 - Gearbox Oil Pipe Disassembly; Gearbox Oil Pipe Assembly; Gearbox Input Shaft Right Bearing Disassembly; Gearbox Input Shaft Left Bearing Disassembly

F1.90
H01900
H01901
H01816
ENGINE DISASSEMBLY/REASSEMBLY
1
st
edition (08-2010) _Rev. 11-2010
Gearbox oil pipe disassembly
• Remove oil pipe (1)
Gearbox oil pipe assembly
• Fit oil pipe (1)
Gearbox input shaft right bearing disassembly
Caution
Temperature differences as well as casing overheating may
lead to structure changes and to cracks due to internal stresses.
Evenly heat casing, making sure not to exceed the recommended value.
• Heat crankcase.
Technical specications
Release/connection
temperature
180 °C
• Remove bearing (1).
Gearbox input shaft left bearing disassembly
Caution
Temperature differences as well as casing overheating may
lead to structure changes and to cracks due to internal stresses.
Evenly heat casing, making sure not to exceed the recommended value.
• Heat crankcase.
Technical specications
Release/connection
temperature
180 °C
• Remove bearing (1).