Engine left crankcase cover disassembly
• Disassemble the following parts:
- Screws (1) and (2) with sealing rings (3)
- Cover (4)
- Gasket (5)
- Guide sleeves (6)
- Oil spraying nozzle (7)
Engine left crankcase cover assembly
• Clean sealing surface.
• Assemble the following parts:
- Oil spraying nozzle (7)
- Guide sleeves (6)
- Gasket (5)
- Cover (4)
• Fit screws (2) with new washers (3).
Tightening torque gures
Engine and crankcase fairing, screw connections
M6 x 25 11 Nm / 1,1 Kgm / 8,11 ft/lb
• Fit screws (1) with new sealing rings (3).
Tightening torque gures
Engine and crankcase fairing, screw connections
M6 x 30 11 Nm / 1,1 Kgm / 8,11 ft/lb
• Tighten screws (1) and (2) all the way down, working crossways.
Engine left crankcase
To Next Page
Loading...
