EasyManua.ls Logo

Husqvarna TE511 - Idle Adjustment (TC); Idle Adjustment (te - TXC - SMR)

Husqvarna TE511
385 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D.8
TE-TXC-SMR
H06417
1
H06416
TC
1
1
st
edition (08-2010) _Rev. 11-2010
SETTINGS AND ADJUSTMENTS
Idle adjustment (TC)
Adjust the carburettor with warm engine and with the throttle control in closed
position. Proceed as follows:
- Turn knob (1) clockwise until fully closed position, then turn anticlockwise
through 33 clicks until obtaining an idle speed of 1,850 - 1,950 rpm, which
can be read using the suitable diagnosis instrument.
Idle adjustment (TE - TXC - SMR)
Adjust the carburettor with warm engine and with the throttle control in closed
position. Proceed as follows:
- Turn adjuster screw (1) with a screwdriver until reaching an idle speed of
1,850 - 1,950 rpm, to be detected by the special diagnosis tester.
Exhaust gas contains poisonous carbon monoxide. Never run the en-
gine indoors.

Table of Contents

Related product manuals