Husqvarna TE511 - Scheduled Maintenance Chart (TE-TXC)

B.2
MAINTENANCE
1
st
edition (08-2010) _Rev. 11-2010
TE -TXC 449 /511
SCHEDULED MAINTENANCE CHART (TO BE CARRIED OUT AT THE HUSQVARNA DEALER)
COMPETITION MOTORCYCLE, RACING USE: WITH FULL POWER ENGINE
ENGINE
EVERY 10 h EVERY 20 h EVERY 30 h EVERY 70 h
REPLACE IF
NECESSARY
ENGINE OIL S
ENGINE OIL FILTERS S/P X
VALVES C (*) S
VALVE SPRINGS C X
VALVE SPRING RETAINERS, VALVE COLLETS C X
VALVE BUCKETS + ROCKER ARM C X
CYLINDER HEAD C
CAMSHAFT C
TIMING CHAIN SLIDER C X
TIMING CHAIN S
TIMING DRIVEN GEAR C X
TIMING DRIVE GEAR C X
TIMING CHAIN TENSIONER C X
INTAKE COUPLING C X
CYLINDER C X
CYLINDER HEAD GASKET S
SPARK PLUG P S
PISTON S
CRANKSHAFT S
CRANKCASE BEARINGS S
OIL PUMP C
PRIMARY TORQUE LIMITER C X
GEARBOX C X
CLUTCH HUB C X
CLUTCH PLATES C X
CLUTCH PRESSURE PLATE C X
CLUTCH HOUSING C X
CLUTCH PUSHROD C X
STARTER GEARS C X
GEAR SHIFT PEDAL C
AIR FILTER P/L (*) X
C: CHECK
C (*): CHECK CLEARANCE
P: CLEAN
P/S (**): CLEAN OR CHANGE (depending on the conditions of use of the motorcycle)
S: CHANGE
P/L (*): EVERY 5 HOURS FOR OFF-ROAD USE.