ICON A5 - Page 523

LANDING GEAR / TROUBLESHOOTING 14-15
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 14
14.3.7 Landing Gear Actuator Fuse Blown
The following procedure is used to determine whether the landing gear actuator has a fuse blown.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
Wing Jack Point Adapter—ICA009750
Parts Required
None
Aircraft System and Number
11—Landing Gear
Consumables
None
TASK INSTRUCTIONS:
1. Check the “NOSE GEAR” or “MAIN GEAR” fuses by inspecting the Overhead Console for the
desired blown fuse.