14-36 LANDING GEAR / BRAKE LINE
ICON A5 / MAINTENANCE MANUAL CHANGE C2
FIGURE 14-21
COMPLETED VIEW OF PARKING VALVE
9. Torque 4x FWD brake line fittings (2x at parking brake, 2x at brake master cylinders) to 90-132
in-lb. Check that hardware is secure.
10. Install parking brake using Neoprene washers. Apply Tef-Gel
®
to bolt threads. Torque 2x bolts to
13-15 in-lb. Check that hardware is secure.
11. Bleed the brakes per the procedure in the Beringer Manual.
VERIFICATION METHOD:
Verify that the parking brake valve is fully assembled.
To Next Page
Loading...
