14-64 LANDING GEAR / NOSE LANDING GEAR
ICON A5 / MAINTENANCE MANUAL CHANGE C2
4. Torque the AN7 pivot bolts and nuts to 322 in-lb
f
.
5. Locate the NLG drag link into position in the bracket on the NLG leg and install the ICA007756
wrist pin.
6. Install retaining ring S73HW2-100-043 into the groove in the wrist pin, securing it in place.
7. Assemble the forward NLG door torsion springs onto the ICA008817 mounts as shown.
To Next Page
Loading...
