3-8 INSPECTIONS / MAINTENANCE SCHEDULES
ICON A5 / MAINTENANCE MANUAL CHANGE C2
RELATED INFORMATION:
"Maintenance Schedules" on page 2-16
"Condition Inspections and 100-Hour Inspections" on page 3-9
"General Engine Line Maintenance" on page 16-26
"Wheel and Brake System Maintenance" on page 14-18
"Transponder" on page 13-8
"Empty Weight and CG Measurement While on Gear" on page 3-30
"Empty Weight and CG Measurement While on Jackpoint Scales" on page 3-32
3.2.3 Overhaul Maintenance
The overhaul maintenance in the table below must be completed at the specified hours or calendar
intervals. The ICON A5 airframe has a mandatory inspection and overhaul by a factory-authorized indi-
vidual every 10 years or 2,000 hours, whichever is shorter. There is no limit to the number of overhauls
that may be performed and ongoing airworthiness will be governed by the recurring overhauls and
inspections.
Maintenance Comments:
|
|
|
|
|
RELATED INFORMATION:
"Maintenance Schedules" on page 2-16
"Condition Inspections and 100-Hour Inspections" on page 3-9
"Overhaul" on page 2-11
Area Ta s k 2000 Hours Initials
Engine Complete Overhaul (See Rotax Manual) X
Or 15 years,
whichever is shorter
Airframe Inspection and Overhaul X
Or 10 years,
whichever is shorter
To Next Page
Loading...
