ICON A5 - Page 637

PROPULSION / ENGINE 16-13
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 16
16.1.4 Engine General Maintenance
16.1.4.1 Remove Engine Cowlings
Use the following instructions to remove top engine cowl, fan shrouds, and exhaust fairings.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Consumables
None
CAUTION: The ELT antenna and the transponder antenna are attached to the
top engine cowling.
TASK INSTRUCTIONS:
1. Release 16 1/4-turn fasteners from top engine cowl using a #15 Torx driver. (See Figure 16-4.)
NOTE: The fasteners stay attached to the top engine cowl.