PROPULSION / PROPELLER 16-107
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
NOTE: Each aircraft has a unique set of six Torx fasteners and washer
stacks. The fasteners and washer stacks must be reinstalled in the
starting condition to maintain proper propeller balance.
3. Remove all orientation marks.
VERIFICATION METHOD:
The task is complete when the spinner dome has been reinstalled.
RELATED INFORMATION:
"Condition and 100-Hour Inspection—Engine and Propeller" on page 3-21
"Balance Propeller" on page 16-95
To Next Page
Loading...
