WING / WING GENERAL MAINTENANCE 17-9
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
9. Check bond integrity of stall strips on leading edge of wing skin. Ensure 1 is installed per wing.
10. Check bond integrity of flap root fences and paint condition in the vicinity of lower surface of
center wing skin.
VERIFICATION METHOD:
Completing the steps above with everything checking as acceptable accomplishes the general wing
inspection.
17.3.2 Remove Left Wing
Instructions for taking the left wing off of the airplane.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
A second person and a ladder are needed to hold the wing.
Parts Required
None
Aircraft System and Number
14—Wing
Consumables
None