Remote RMX-3200 Version 5.2x Configuration Guide
Configuring a Wireless Network with Remote RMX-3200: Configuring the Wireless Modem
11-8
7. (optional) Verify that the UMTS serial interface has been configured properly:
show interfaces serial wan/1
The command response similar to the following displays:
(Dub)>show interface serial wan/1
serial wan/1 name=serial wan/1 system-name=ppp_umts
status=enabled link-state=up
address=167.214.133.56 pointopoint=10.0.0.1
Stats: Bytes Packets Errors Dropped Overrun Framing
Rx 31242388 182608 0 0 0 0
Tx 29748523 173100 0 0 0 0
(Dub)>
To Next Page
Loading...
