Kentrox RMX-3200 - Page 247

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring the SNMP Proxy: Configuring a Mediation SNMP Measurement Template
22-13
3. Configure the dynamic poll table with the following settings:
 table OID .1.3.6.1.4.1.539.42.2.2
 match column (number) 7
 match value (for specified column) 5
config mediation snmp measurement-template alTableDef poll-table
.1.3.6.1.4.1.539.42.2.2 7 5
4. Configure the template alTableDef to consider as significant the second numeric
value in a string response:
config mediation snmp measurement-template alTableDef value-match
2
5. Configure an SNMP trap named critical, with a trap OID
1.3.6.1.4.1.539.42.2.0.5 for the critical state:
config mediation snmp measurement-template alTableDef trap
critical trap-oid .1.3.6.1.4.1.539.42.2.0.5
6. Configure the varbind OID .1.3.6.1.4.1.539.42.2.2.1.7 for the critical
state:
config mediation snmp measurement-template alTableDef trap
critical varbind-id .1.3.6.1.4.1.539.42.2.2.1.7
7. Configure a varbind value of for .1.3.6.1.4.1.539.42.2.2.1.5 for the
critical state:
config mediation snmp measurement-template alTableDef trap
critical varbind-value .1.3.6.1.4.1.539.42.2.2.1.5
8. Configure the template alTableDef to consider as significant the second numeric
value in a string response for
critical traps:
config mediation snmp measurement-template alTableDef trap
critical value-match 2