Keysight U8480 Series - Page 105

CALCulate Subsystem 3
U8480 Series Programming Guide 105
Example
Reset condition
On reset, the lower limit is set to –90.00 dBm (DEF).
Query
CALCulate[1]:LIMit:LOWer[:DATA]? [MIN|MAX]
The query returns the current setting of the lower limit or the values associated
with MIN and MAX.
Query example
CALC:LIM:LOW 0.1 This command enters a lower limit for the
measurement depending on the unit as
follows:
dBm = 0.1 dBm
W = 100 mW
CALC:LIM:LOW? Queries the lower limit set.