U8480 Series USB Thermocouple Power Sensor
Programming Guide
351
15 Programming Examples
Identifying the U8480 Series In Use 352
FETCh, MEASure, and READ Queries 353
CW Power Measurement from +20 dBm to –35 dBm 355
Acquiring 400 Readings/s with Buffer Mode 358
Frequency-Dependent Offset 359
Frequency Sweep Operation 360
Power Sweep Operation 363
Gamma Correction 366
S-Parameter Correction 368
Real-Time Measurement Uncertainty 369
This chapter provides the programming sequences or examples to remotely
control the U8480 Series using SCPI commands.
To Next Page
Loading...