Keysight U8480 Series - TRIGger Subsystem

U8480 Series USB Thermocouple Power Sensor
Programming Guide
297
12 TRIGger Subsystem
TRIGger Command Subsystem 298
ABORt[1] 299
INITiate Commands 300
INITiate[1]:CONTinuous <boolean> 301
INITiate[1][:IMMediate] 303
INITiate[1]:CONTinuous:ALL <boolean> 304
INITiate[1]:CONTinuous:SEQuence[1] <boolean> 306
INITiate[1][:IMMediate]:ALL 308
INITiate[1][:IMMediate]:SEQuence[1] 309
TRIGger Commands 310
TRIGger[1]:DELay:AUTO <boolean> 311
TRIGger[1][:IMMediate] 313
TRIGger[1]:SOURce BUS|EXTernal|HOLD|IMMediate 314
TRIGger[:SEQuence]:DELay <numeric_value> 317
TRIGger[:SEQuence]:SLOPe <character_data> 319
TRIGger[:SEQuence[1]]:COUNt <numeric_value> 320
TRIGger[:SEQuence[1]]:DELay:AUTO <boolean> 322
TRIGger[:SEQuence[1]]:IMMediate 324
TRIGger[:SEQuence[1]]:SOURce BUS|EXTernal|HOLD|IMMediate 325
This chapter explains how the TRIGger command subsystem is used to
synchronize device actions with events.