Keysight U8480 Series - 1 U8480 Series Remote Operation; Introduction

1 U8480 Series Remote Operation
16 U8480 Series Programming Guide
Introduction
This chapter contains the following sections:
– “Configuring the USB Interface” on page 17.
– “An Introduction to the SCPI Language” on page 18.
– “Zeroing and Calibrating the U8480 Series” on page 26.
– “Making Measurements” on page 28.
– “Using Frequency-Dependent Offset Tables” on page 36.
– “Setting the Averaging” on page 43.
– “Setting Offsets” on page 45.
– “Setting Measurement Limits” on page 46.
– “Getting the Best Speed Performance” on page 50.
– “How Measurements are Calculated” on page 53.
– “Status Reporting” on page 54.
– “Saving and Recalling U8480 Series Configurations” on page 69.
– “Using Device Clear to Halt Measurements” on page 70.