Keysight U8480 Series - Memory:clear[:Name] <Character_Data

MEMory Subsystem 6
U8480 Series Programming Guide 141
MEMory:CLEar[:NAME] <“character_data”>
This command clears the contents of a specified frequency-dependent offset
table, Gamma table, S-Parameter table, or save/recall register.
Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts|MEMory:TABLe:SGAMma:POIN|MEM:
TABLe:SPAR:POIN? query returns a 0 as there are no contents in the table.
For frequency-dependent offset tables, Gamma tables, and the S-Parameter
table, this command is an alternative form of the MEMory:CLEar:TABLe command.
The only difference is the method in which the table is selected.
NOTE
The contents cleared using this command are non-recoverable.