Keysight U8480 Series - Page 142

6 MEMory Subsystem
142 U8480 Series Programming Guide
Syntax
Parameter
Example
Error message
If the table or save/recall register name does not exist, error –224, “Illegal
parameter value” occurs.
Item Description/Default Range of values
character_data
Contains an existing table name or
save/recall register.
Any existing table name or save/recall register.
MEM:CLE “TABLE5” This command clears the contents of
frequency-dependent offset table, TABLE5.
MEM
:CLE :NAME
Space
“character_data”