STATus Subsystem 10
U8480 Series Programming Guide 275
STATus:PRESet
PRESet sets a number of the status registers to their preset values as shown below
— all other registers are unaffected. Bit 15 is always 0.
Syntax
Register Filter/Enable PRESet value
OPERation ENABle all zeros
PTR all ones
NTR all zeros
QUEStionable ENABle all zeros
PTR all ones
NTR all zeros
All others ENABle all ones
PTR all ones
NTR all zeros
To Next Page
Loading...