Keysight U8480 Series - Unit[1]:Power <Amplitude_Unit

13 UNIT Subsystem
328 U8480 Series Programming Guide
UNIT[1]:POWer <amplitude_unit>
This command sets the power measurement unit which is used for any command
that accepts a numeric value in more than one unit.
Syntax
Parameters
Example
Item Description/Default Range of values
amplitude_unit The measurement unit. The default unit is dBm.
W
DBM
UNIT:POW DBM This command sets the power measurement
unit to dBm.
amplitude_unit
:POW
Space
?
UNIT
1