Keysight U8480 Series - Input:trigger:impedance [HIGH|LOW]

7 INPut Subsystem
172 U8480 Series Programming Guide
INPut:TRIGger:IMPedance [HIGH|LOW]
This command sets the impedance of the trigger input port.
Syntax
Parameters
Example
Reset condition
On reset, the trigger input impedance is set to LOW.
Item Description/Default Range of values
character_data
Trigger input impedance:
– LOW: 50 Ω (default)
– HIGH: 1 MΩ
LOW
HIGH
INP:TRIG:IMP LOW Sets the trigger input impedance to low (50 Ω ) .
:IMP
INP
:TRIG
character_data
Space
?