Keysight U8480 Series - [Sense[1]:]Correction:sgamma:magnitude <Numeric_Value

8 SENSe Subsystem
204 U8480 Series Programming Guide
[SENSe[1]:]CORRection:SGAMma:MAGNitude <numeric_value>
This command is used to set the magnitude of the source reflection coefficient, Γ
G
.
Syntax
Parameters
Item Description/Default Range of values
numeric_value
A numeric value:
– The default is 0.0
0.0 to 0.999
SENS
1
CORR
:
:MAGN
Space
:SGAM
?
numeric_value