Keysight U8480 Series - System:persona:manufacturer <String

SYSTem Subsystem 11
U8480 Series Programming Guide 289
SYSTem:PERSona:MANufacturer <"string">
This command only accepts two non-case sensitive strings “Agilent Technologies”
and “Keysight Technologies”. A power cycle or reboot is required for the changes
in the instrument’s manufacturer string to take effect and to be recognized in the
Keysight Connection Expert. The string will remain for the subsequent power cycle
or reboot.
Syntax
Example
Reset condition
On reset, the manufacturer string is not affected.
SYST
:PERS
:MAN
Space
“string”
?
SYST:PERS:MAN "Agilent Technologies" This command sets the
instrument’s manufacturer to
“Agilent Technologies”.
SYST:PERS:MAN "Keysight Technologies" This command sets the
instrument’s manufacturer to
“Keysight Technologies”.