10 STATus Subsystem
272 U8480 Series Programming Guide
STATus:OPERation:SENSe[:SUMMary]
The operation status sense summary register set contains information on the
status of the U8480 Series.
The following bit in these registers is used by the U8480 Series:
Bit 1 is set when the U8480 Series is reading data from the non-volatile memory.
This bit is cleared when the U8480 Series is not reading data from the non-volatile
memory.
Syntax
Bit number Decimal weight Definition
0-Not used
1 2 SENSe status
2 to 15 - Not used (bit 15 is always 0)
To Next Page
Loading...