Keysight U8480 Series - Memory:table:sgamma <Numeric_Value>,<Numeric_Value> {,<Numeric_Value>}{,<Numeric_Value

6 MEMory Subsystem
164 U8480 Series Programming Guide
MEMory:TABLe:SGAMma <numeric_value>,<numeric_value>
{,<numeric_value>}{,<numeric_value>}
This command sets the magnitude-phase pairs for the source gamma; for the
currently selected Gamma Table. A Gamma Table needs to be selected before this
command can be used. The maximum number of magnitude-phase pairs is 1024.
Syntax
Parameters
Example
Item Description/Default Range of values
numeric_value Sets the magnitude-phase pair values
Magnitude: 0.0 to 0.999
Phase: –180.0
o
≤ p < +180.0
o
MEM:TABL:SGAM 1.0,160,0.45,60 This command sets the magnitude-phase
pair as 1.0 (mag1), 160 (phase1), 0.45
(mag2), and 60 (phase2).
MEM
:TABL
:SGAM
Space
?
,
numeric_value
numeric_value