Keysight U8480 Series - [Sense[1]:]Correction:gain2:State <Boolean

8 SENSe Subsystem
200 U8480 Series Programming Guide
[SENSe[1]:]CORRection:GAIN2:STATe <boolean>
This command is used to enable and disable a channel offset for the U8480 Series
setup.
The [SENSe[1]:]CORRection:GAIN2[:INPut][:MAGNitude] command is used to
enter the loss/gain value.
Syntax
Example
Reset condition
On reset, the channel offset is disabled.
CORR:GAIN2:STAT ON This command enables a channel offset.
SENS
1
:GAIN2
CORR
:
:STAT
0|OFF
1|ON
Space
?