Keysight U8480 Series - SYSTem:PRESet <character_data>

11 SYSTem Subsystem
292 U8480 Series Programming Guide
SYSTem:PRESet <character_data>
This command presets the U8480 Series to the values appropriate for measuring
the communications format specified by <character_data>. The U8480 Series is
preset to the default values if no value or the value DEFault is supplied.
Syntax
Parameters
Example
NOTE
DEFault settings apply to both *RST and to SYSTem:PRESet DEFault unless
stated otherwise.
SYST
:PRES
Space
character_data
Item Description Range of values
character_data
A communications format which determines the preset
values.
DEFault
SYST:PRES DEF This command presets the U8480 Series to
the default values. The same default values
are set when the parameter is omitted.