Keysight U8480 Series - Calculate[1]:Math[:Expression] <String

CALCulate Subsystem 3
U8480 Series Programming Guide 111
CALCulate[1]:MATH[:EXPRession] <“string”>
This command sets to a single measurement.
Syntax
Parameters
Example
Reset condition
On reset, the measurements are set to “(SENS1)”.
Item Description/Default Range of values
string A single string value detailing the measurement type:
The default is SENS1.
“(SENS1)”
[a], [b]
[a] Quotes are mandatory. Either single or double quotes may be used.
[b] Must be uppercased.
CALC:MATH “(SENS1)” This command sets to a single measurement.
:EXPR
:MATH
?
Space
“string”
CALC
1