Keysight U8480 Series - 3 Calculate Subsystem; Calculate Command Subsystem

3 CALCulate Subsystem
94 U8480 Series Programming Guide
CALCulate Command Subsystem
The CALCulate command subsystem performs post-acquisition data processing.
Functions in the SENSe command subsystem are related to data acquisition, while
the CALCulate command subsystem operates on the data acquired by a SENSe
function.
There is an independent CALCulate block in the U8480 Series, as shown below.
Figure 3-1 Measurement display CALCulate block channel
Figure 3-2 details where the commands are applied within the CALCulate block.
Figure 3-2 CALCulate block
CALC1
current measurement
“A”
:MATH
CALCulate Block
SENSe[1]:
Input from
SENSe[1]
block
FEED1
:FEED
Avg