Keysight U8480 Series - 8 Sense Subsystem; [Sense] Command Subsystem

SENSe Subsystem 8
U8480 Series Programming Guide 177
[SENSe] Command Subsystem
The SENSe command subsystem directly affects device-specific settings used to
make measurements. The SENSe command subsystem is optional because this is
the primary function of the U8480 Series. The high-level command CONFigure
uses the SENSe commands to prepare the U8480 Series for making
measurements. At a lower level, SENSe enables you to change the parameters
without completely re-configuring the U8480 Series.
The SENSe command subsystem also allows you to select the measurement and a
frequency-dependent offset table, a Gamma table, or an S-Parameter table.