Keysight U8480 Series - [Sense[1]:]Correction:gain2[:Input][:Magnitude] <Numeric_Value

8 SENSe Subsystem
202 U8480 Series Programming Guide
[SENSe[1]:]CORRection:GAIN2[:INPut][:MAGNitude]
<numeric_value>
This command is used to enter a channel offset value for the U8480 Series setup.
The U8480 Series then corrects every measurement by this factor to compensate
for the gain/loss.
Entering a value for GAIN2 using this command automatically turns the
[SENSe[1]:]CORRection:GAIN2:STATe command to ON.
Syntax
Parameters
Item Description/Default Range of values
numeric_value
A numeric value:
– DEF: The default is 0.00 dB
– MIN: –100 dB
– MAX: +100 dB
–100 to +100 dB
DEF
MIN
MAX
SENS
1
CORR
:
:INP
:MAGN
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
:GAIN2