U8480 Series Remote Operation 1
U8480 Series Programming Guide 69
Saving and Recalling U8480 Series Configurations
To reduce repeated programming, up to ten U8480 Series configurations can be
stored in the U8480 Series non-volatile memory. The error list, remote addresses,
calibration table data, and zeroing/calibration information are not stored.
How to save and recall a configuration
The U8480 Series configurations are saved and recalled with the following
commands:
*SAV <NRf>
*RCL <NRf>
The range of values for <NRf> in the above commands is 1 to 10.
To Next Page
Loading...