Keysight U8480 Series - Format[:Readings]:Border <Character_Data

FORMat Subsystem 5
U8480 Series Programming Guide 127
FORMat[:READings]:BORDer <character_data>
This command controls whether the binary data is transferred in normal or
swapped Byte ORDer. It is only used when FORMat[:READings][:DATA] is set to
REAL.
Syntax
Parameters
Example
Reset condition
On reset, this value is set to NORMal.
Item Description/Default Range of values
character_data
Byte order of binary data transfer:
– NORMal
– SWAPped
NORMal
SWAPped
FORM:BORD SWAP This command sets the byte order to
swapped.
FORM
:READ :BORD
Space
?
character_data