Keysight U8480 Series - Calculate[1]:Limit:state <Boolean

3 CALCulate Subsystem
108 U8480 Series Programming Guide
CALCulate[1]:LIMit:STATe <boolean>
This command enables/disables the test limits.
Syntax
Example
Reset condition
On reset, limit checking is disabled.
Query
CALCulate[1]:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the limits
testing feature.
– 1 is returned when limit testing is enabled
– 0 is returned when limit testing is disabled
CALC:LIM:STAT 1 This command enables the limit checking
function.
0|OFF
1|ON
Space
?
:LIM
:STAT
CALC
1