Keysight U8480 Series - Page 107

CALCulate Subsystem 3
U8480 Series Programming Guide 107
Example
Reset condition
On reset, the measurement limit is set to +90.00 dBm (DEF).
Query
CALCulate[1]:LIMit:UPPer[:DATA]? [MIN|MAX]
The query returns the current setting of the upper limit or the values associated
with MIN and MAX.
Query example
CALC:LIM:UPP 5 This command enters an upper limit for the
measurement depending on the unit as
follows:
dBm = 5 dBm
W = 5 W
CALC:LIM:UPP? Queries the setting of the upper limit.