Keysight U8480 Series - Service:sensor[1]:Cduedate <Date

SERVice Subsystem 9
U8480 Series Programming Guide 245
SERVice:SENSor[1]:CDUEdate <“date”>
This command is used to enter the calibration due date of the U8480 Series.
Syntax
Example
Query
SERVice:SENSor[1]:CDUEdate?
This query returns the calibration due date of the U8480 Series. The calibration
due date information is stored in the non-volatile memory.
Query example
SERV:SENS:CDUE “2012,09,21” This command enters the calibration
due date as 21st September 2012.
SERV
1
:CDUE
:SENS
“date”
?
Space
SERV:SENS:CDUE? Returns the calibration due date of the U8480 Series.