U8480 Series Remote Operation 1
U8480 Series Programming Guide 17
Configuring the USB Interface
The USB interface requires no front panel or remote configuration.
Before connecting the USB cable, make sure that the Keysight IO Libraries
software is installed on your PC.
For further information on connecting and verifying the U8480 Series via USB,
refer to the U8480 Series User’s Guide.
– For more information on configuring the USB remote interface connectivity,
refer to the Keysight USB/LAN/GPIB Interfaces Connectivity Guide.
– If you have installed the IO Libraries Suite, you can access the Connectivity
Guide via the IO Libraries Control icon or via the Web at www.keysight.com/
find/connectivity.
– If you have installed other I/O software, refer to the documentation that
accompanies the software.
To Next Page
Loading...